Machining Requests

Machining Requests

(11 - 20 from 1008 applications)

 
Custom Machined Parts

alluminium shaft lock collars

Posted 2day 18h ago

End: 5d 5h

6 Offers

two different sized shaft lock collars made from alluminium all tolerances are 0.1mm. thanks

Vin.jh

Custom parts
Flat steel spacers for a grinding machine

Posted 3d 1h ago

End: 22h

3 Offers

Price please for 7 spacers as per attached pdf, each spacer must be exactly the same length at 170mm +/- 0 The material can be bright bar or similar Dimensions ...

Price please for 7 spacers as per attached pdf, each spacer must be exactly the same length at 170mm +/- 0 The material can be bright bar or similar Dimensions 170mm x 50mm x 5mm, with a longitudinal slot 60mm long x 10mm wide.

Gysyjack (P)                                                                                    

Custom parts
Bath bomb moulds

Posted 3d 12h ago

End: 11h

1 Offer

Hi looking for 2.75" stainless Steel. Moulds .its got 3 sections outer tube and 2 internal with 2.75" half circle moulds. Top section. Has a nut or a 12mm thre ...

Hi looking for 2.75" stainless Steel. Moulds .its got 3 sections outer tube and 2 internal with 2.75" half circle moulds. Top section. Has a nut or a 12mm thread at 1.25 pitch so it can screw into piston with a thread on it

Kkbathbombpress                                                                                    

Custom parts
Prototype

Posted 3d 22h ago

End: 1h

1 Offer

Hey there, I need these 2 prototypes to be machined out of aluminium. Please have a look and let me know the quote. Thanks

Hey there, I need these 2 prototypes to be machined out of aluminium. Please have a look and let me know the quote. Thanks

fatguyslim                                                                                    

Custom parts
spring plate for large format camera

Posted 4d 12h ago

End: 0d 0h

2 Offers

Hi, I'm looking for a unit price for 100 of the attached parts in 1.6mm FR4 (ideally black but natural is ok too). Thanks Steve (http://Chroma.Camera)

Hi, I'm looking for a unit price for 100 of the attached parts in 1.6mm FR4 (ideally black but natural is ok too). Thanks Steve (http://Chroma.Camera)

SteveChroma                                                                                    

Custom Machined Parts

6 x aluminium bars

Posted 4day 16h ago

End: 0d 0h

2 Offers

First hole from right must have a tread and second non tread.

Roman

Custom parts
one off printer part

Posted 6d 14h ago

End: 0d 0h

6 Offers

just need best price for this in aluminium shipped to Birmingham uk

just need best price for this in aluminium shipped to Birmingham uk

Leor1c                                                                                    

Custom parts
1off 10mm T Aluminium Shield - 720mm x 500mm

Posted 6d 19h ago

End: 0d 0h

0 Offer

10mm T Aluminium Machined Shield (see attached dxf file). Must have 45 degree 5mm bevel on edges. Tolerance not critical. Delivery to Northern Ireland.

10mm T Aluminium Machined Shield (see attached dxf file). Must have 45 degree 5mm bevel on edges. Tolerance not critical. Delivery to Northern Ireland.

aidanl (P)                                                                                    

Custom parts
Four Brass or UHMWPE Sliders for Narrowboat Hatch

Posted 6d 20h ago

End: 1d 3h

2 Offers

Two of the four brass sliders on my narrowboat hatch have been lost, so I'm looking to replace the whole lot with a new set. The pieces are cubes of around 25 ...

Two of the four brass sliders on my narrowboat hatch have been lost, so I'm looking to replace the whole lot with a new set. The pieces are cubes of around 25 x 25 x 25 mm, with a groove cut for the runner to slide along and hole for a bolt to screw into. Either brass or UHMWPE is required. After quote I can provide exact dimensions, or even post one of the pieces for reference.

SceezSwape                                                                                    

Custom Machined Parts

Bracket mount

Posted 6day 20h ago

End: 0d 0h

1 Offer

Hi there, looking for this part made in aluminium. The bolt hole at the top is to be tapped for M4 bolt. I have the tools to tap it, and I have set the diameter at 3.3mm but happy to take advice on that if its wrong. For more info, please ask.

DubStudio