Machining Requests

Machining Requests

(2551 - 2560 from 2561 applications)

 
Custom parts
Mechanical Concentrator

Posted 1830d 17h ago

End: 0d 0h

1 Offer

1 concentrator as shown in the drawing. If the price is good, two other designs might be requested for machining. Material is ALUMINIUM ALLOY 6082 T6 Delivery...

aaalbadi1                                                                                    

Custom parts
Aluminium Housings

Posted 1840d 17h ago

End: 0d 0h

0 Offer

Hi, I’m a PhD student in engineering at the University of Oxford. I am currently undertaking an instrumentation project and require some aluminium housings f...

ronan.royston                                                                                    

Custom parts
4 alu spacers diam. ext30mm, diam int 12mm

Posted 1851d 18h ago

End: 0d 0h

1 Offer

Dear sir, I would like to receive an offe for 4 aluminium spacers. External diameter 30mm Internal diameter 12mm thickness 4,5mm

olivierC                                                                                    

Custom Machined Parts
Nipple for brake rod and cable. Vintage bike brake part.

Posted 1858day 15h ago

End: 0d 0h

1 Offer

6 of. Good quality steel. ie EN 8. Would be advised on this.

6 of. Good quality steel. ie EN 8. Would be advised on this.

pitfarm

Custom parts
Multiscale Bridge for guitar

Posted 1859d 23h ago

End: 0d 0h

0 Offer

Machined from brass or bronze please. the only critical tolerances are the hole spacings at 11.5mm apart, and the width of the 'channels' at 4.5mm wide. Ideally...

mark120861                                                                                    

Custom parts
Key_buttons

Posted 1866d 22h ago

End: 0d 0h

0 Offer

Please quote for 5,000 and 80,000 buttons. Ship to London

bd2000ltd (P)                                                                                    

Custom parts
Bearing blocks

Posted 1872d 19h ago

End: 0d 0h

1 Offer

Outside bearing blocks for model paddle boat. Material: Any hardwood Tolerance. Not criticle apart from center bore to take 16mm dia bushing 2 off required.

marlina2                                                                                    

Custom parts
Paddle wheel hubs

Posted 1872d 20h ago

End: 0d 0h

2 Offers

Hubs to be used for model paddle boat. 2 required in Aluminium or Nylon Tolerances +/- 0.1mm

marlina2                                                                                    

Custom parts
Turntable Bearing Parts

Posted 1875d 0h ago

End: 0d 0h

0 Offer

i am modifying a Hi-Fi turntable to take a new design of platter and damping. At the moment i require two parts in order to adapt the existing inverted bearing....

Banguwangi                                                                                    

4 PADDLE WHEEL HUBS

Posted 1894d 11h ago

End: 0d 0h

0 Offer