Machining Requests

Machining Requests

(21 - 30 from 870 applications)

 
Custom parts
Hub Adapters

Posted 6d 8h ago

End: 0d 0h

2 Offers

Looking for 2 of the items attached, tollerances of 0.01mm for all diameters and 0.1mm for all depths and lengths.

Looking for 2 of the items attached, tollerances of 0.01mm for all diameters and 0.1mm for all depths and lengths.

Mihail                                                                                    

Custom parts
Board game piece holder

Posted 6d 23h ago

End: 1d 0h

2 Offers

Mill 4-off from acrylic sheet (would also consider plywood, MDF) Sheet thickness could be altered if required. Please suggest available colours.

Mill 4-off from acrylic sheet (would also consider plywood, MDF) Sheet thickness could be altered if required. Please suggest available colours.

ttjph                                                                                    

Custom parts
Fork Brace

Posted 7d 2h ago

End: 21h

1 Offer

I require a billet aluminum fork brace which will also hold the front mudguard on my motorcycle. I have attached rough drawings the measurements are correct. Uk ...

I require a billet aluminum fork brace which will also hold the front mudguard on my motorcycle. I have attached rough drawings the measurements are correct. Uk central based near Oxford. 07986526289 Mike

Mike Stewart A                                                                                    

Custom Machined Parts

Slot Cutting

Posted 7day 12h ago

End: 0d 0h

2 Offers

We need to get slots cut for 22 slats. We will provide the parts, which are made of stainless 316. All you need to do is just cut the 258x10x4 mm slot in the middle (the round chamfer can be smaller if necessary). Though there could be concern about bending during cutting, trials we done shows it would not affect the manufacturing and function as long as the part is clamped properly on your cnc. No special requirements on tolerance. General machine finish and precision up to 0.5mm will be acceptable.

ZYPan

Custom parts
Thumb Stop

Posted 8d 5h ago

End: 0d 0h

3 Offers

Looking for a small batch of 50 - 100 and then possibly more in the future. Can be made out of most cheap metals that are strong enough to hold a thread.

Looking for a small batch of 50 - 100 and then possibly more in the future. Can be made out of most cheap metals that are strong enough to hold a thread.

woods0787                                                                                    

Custom Machined Parts

Bearing tool

Posted 9day 7h ago

End: 0d 0h

3 Offers

Hi, would like this tool used for bicycle mechanic. Alloy or steel will do, cheaper the better. Any questions, ask. Many thanks

Thcuenot A

Custom parts
Rod end caps

Posted 11d 1h ago

End: 0d 0h

1 Offer

I intend to tap the ~7mm hole to 5/16 unf and the smaller hole behind in 1/4 unc. If you could quote for tapping these as well as without doing so I would great ...

I intend to tap the ~7mm hole to 5/16 unf and the smaller hole behind in 1/4 unc. If you could quote for tapping these as well as without doing so I would greatly appreciate it. Any reasonably solid aluminium would do, and I would need 2.

AdamMcSweeney                                                                                    

Custom parts
5 cubes with carvings (CNC/3d)

Posted 11d 2h ago

End: 0d 0h

0 Offer

Please take a look at the CAD file attached for schematics. I need a cheap material, which will be somewhat flexible (analogue to resing/strong gum), silicon. ...

Please take a look at the CAD file attached for schematics. I need a cheap material, which will be somewhat flexible (analogue to resing/strong gum), silicon. Must be below 5GBP per piece (after first 5 we will order 200-300 more pieces)

Toucheys                                                                                    

Custom Machined Parts

Throttle Body Adaptor

Posted 11day 7h ago

End: 0d 0h

4 Offers

I’m looking for 1 or 2 of the attached file machined. Material: 6061 or better.

s31teg A

Custom parts
Aluminium fittings for tubes in 3d printing system

Posted 12d 4h ago

End: 0d 0h

3 Offers

I am building a bespoke system of mud extrusion as part of my research project at Cardiff university and those are important pieces in the system. The required ...

I am building a bespoke system of mud extrusion as part of my research project at Cardiff university and those are important pieces in the system. The required material is aluminium. part A (x3 pieces), part B (x3 pieces), part C (x4 pieces), part D (x3 pieces).

gomaam (P)