Machining Requests

Machining Requests

(31 - 40 from 1176 applications)

 
Custom parts
Aluminium spacers

Posted 15d 5h ago

End: 0d 0h

5 Offers

I need four replicates of this component. To be made in aluminium, ideally 6082 grade.

I need four replicates of this component. To be made in aluminium, ideally 6082 grade.

piersac A                                                                                    

Custom parts
Aluminium prototype parts 1off of each

Posted 16d 15h ago

End: 0d 0h

2 Offers

1 of each part, Aluminium 6061 or similar. 3 parts total. Break all edges either by chamfer or tumbling. Small engraving required on each part too - STEP fil ...

1 of each part, Aluminium 6061 or similar. 3 parts total. Break all edges either by chamfer or tumbling. Small engraving required on each part too - STEP file with relevant sketch will be provided on accepted quote. If black hard anodising is possible please quote with and without. Tolerances on all parts +/- 0.1mm.

edwardbmason                                                                                    

Custom Machined Parts

Gantry Plate, 6mm Aluminium

Posted 17day 5h ago

End: 0d 0h

6 Offers

Needing a single 6mm aluminium plate roughly 97x46mm machined precisely with 3mm deep pockets and 8x tapped holes (4xM3 & 4xM6), 4 untapped and 4 slots. Hole positions critical and high tolerance needed, outer border less so. CAD model can be provided as IGS, STP, STL or possibly dxf.

SamanthaJaneyCake A

Custom parts
1 bracket made from powder coated 5052 Aluminum

Posted 17d 12h ago

End: 0d 0h

0 Offer

The bracket is 125mm high with two right angles. Should be made from 4mm thick material.

The bracket is 125mm high with two right angles. Should be made from 4mm thick material.

Laurence_evans                                                                                    

Design project

Posted 19d 17h ago

End: 0d 0h

2 Offers

All spec and tolerances are as per drawing. Delivery is to be to Germany with exact dress to be confirmed

                                                                                   

Custom parts
CNC Ox Upgrades

Posted 20d 4h ago

End: 0d 0h

0 Offer

Recently purchased used ox and planning upgrade to ACME screw. 1 x 76000 1 x 18329 1 x 83674 1 x 62300 2 x 56876 2 x 20797

Recently purchased used ox and planning upgrade to ACME screw. 1 x 76000 1 x 18329 1 x 83674 1 x 62300 2 x 56876 2 x 20797

JP5000                                                                                    

Custom parts
Sheet Metal CNC

Posted 20d 10h ago

End: 0d 0h

2 Offers

Hi, I'm looking to get some CNC work done on two 3mm thick sheet metals. One aluminium and one high strength steel. I need a quote ASAP, as I'm looking to get ...

Hi, I'm looking to get some CNC work done on two 3mm thick sheet metals. One aluminium and one high strength steel. I need a quote ASAP, as I'm looking to get this done quickly. Thanks

TheoK89 (P)                                                                                    

Custom parts
Strap Lugs Camera

Posted 21d 8h ago

End: 0d 0h

0 Offer

These are replacement parts that are riveted onto an alloy camera shell. 'D' rings or similar are attached to the lugs to which the strap is attached. Originals ...

These are replacement parts that are riveted onto an alloy camera shell. 'D' rings or similar are attached to the lugs to which the strap is attached. Originals were brass brass but they wear quite easily. Stainless steel would be a better option. The rivet or peg detail is hollow, so that it can be spread from behind so that it can be secured to the body shell. The material needs to be soft enough to allow the peg to be spread - annealed? Finish in brushed or satin etc.

cameraworks                                                                                    

Custom Machined Parts

eBike Twin Battery Rear Pannier Plate

Posted 21day 10h ago

End: 0d 0h

5 Offers

Hi I require a custom CNC machined T6 aluminium plate to be cut to the exact specifications shown on the attached CAD files. No finishing is required just the raw metal finish. Can you please give me a quote including VAT and shipping to Liverpool, Merseyside, UK, L4 0TB

seanobrien2015 A

Custom parts
22 miles steel plates

Posted 22d 4h ago

End: 0d 0h

0 Offer

Hi. I require 22 steel plates to be cut from 1,5mm miles steel, or zinc steel or similar steel. Best way would be something that is already rust protected. Many ...

Hi. I require 22 steel plates to be cut from 1,5mm miles steel, or zinc steel or similar steel. Best way would be something that is already rust protected. Many thanks.

stenlly574