Machining Requests

Machining Requests

(41 - 50 from 1176 applications)

 
Custom parts
Aluminium Bass Bridge to reproduce

Posted 22d 5h ago

End: 0d 0h

1 Offer

Hello there! I have an aluminium hardware piece, to be used on a musical instrument, to reproduce. It's about 12 cms in length. The best would surely be to sen ...

Hello there! I have an aluminium hardware piece, to be used on a musical instrument, to reproduce. It's about 12 cms in length. The best would surely be to send it out to you in order to get the measurements just right. Delivery would be to France. Tolerances would have to be reasonably tight and the out-of-machine finish fine enough to receive an anodised treatment. Thanks!

TeslaWouldAgree                                                                                    

Custom parts
Snare housing LH & RH

Posted 22d 13h ago

End: 0d 0h

0 Offer

The material to be used is Oak timber. I'm not sure what tolerance to request, are there different charges involved? At present we are still prototyping, theref ...

The material to be used is Oak timber. I'm not sure what tolerance to request, are there different charges involved? At present we are still prototyping, therefore we just need one of each in order to check the fit and make any adjustments that may be required. There after we would place an order for 100 units of both LH & RH housings. Delivery - 26 Gannochy Cresent, Montrose, Angus, DD10 9BZ

beatbuddy (P)                                                                                    

Custom parts
guitar scratchplates and pickup surrounds

Posted 23d 15h ago

End: 0d 0h

0 Offer

I am looking to get some plastic guitar parts cut. I need 10 scrathplates and 10 of each pickup surround cutting. I have the materials. Thanks, Anthony

I am looking to get some plastic guitar parts cut. I need 10 scrathplates and 10 of each pickup surround cutting. I have the materials. Thanks, Anthony

lefty                                                                                    

Custom parts
I need a small shim

Posted 24d 5h ago

End: 0d 0h

2 Offers

Hello I need a 20MM deep shim, this needs to be OD 24.97 ID 23.36.

Hello I need a 20MM deep shim, this needs to be OD 24.97 ID 23.36.

Jarl6                                                                                    

Custom parts
Stem Cap

Posted 24d 17h ago

End: 0d 0h

3 Offers

The material is 304 Stainless Steel. The quantity is 1 off. Tolerances are standard machine tolerances. Thread spigot is M6 x 1 x 14mm LG

The material is 304 Stainless Steel. The quantity is 1 off. Tolerances are standard machine tolerances. Thread spigot is M6 x 1 x 14mm LG

henry123456                                                                                    

Custom Machined Parts

SPACER

Posted 25day 14h ago

End: 0d 0h

4 Offers

5mm thick with 9 holes. dxf / part files can be sent through. MILD STEEL.

jack.smith A

Custom parts
1 SPACER MILD STEEL.

Posted 25d 14h ago

End: 0d 0h

0 Offer

SEE DRAWING. 5MM THICK. 2 SETS OF HOLES. WOULD BE SUITABLE FOR LASER/PLASMA CUT THEN THREADING 4 HOLES.

SEE DRAWING. 5MM THICK. 2 SETS OF HOLES. WOULD BE SUITABLE FOR LASER/PLASMA CUT THEN THREADING 4 HOLES.

jack.smith A (P)                                                                                    

Prototype Table Top Buck

Posted 25d 15h ago

End: 0d 0h

1 Offer

One unit to be made out of Aluminium. Will be used as a buck to make a carbon fiber mould. Delivered to Amersham UK

(P)                                                                                    

Holder

Posted 27d 6h ago

End: 0d 0h

1 Offer

Material: stainless steel 304. Tolerances: +-0.1mm

                                                                                   

Custom parts
Stepped hole with a stepped fitted collar

Posted 27d 7h ago

End: 0d 0h

2 Offers

I require a set of motorcycle to a have a collar reducing the size by about 1.5 MM, this would probably be best done with a step being machined in the original ...

I require a set of motorcycle to a have a collar reducing the size by about 1.5 MM, this would probably be best done with a step being machined in the original hole and a collar being machined to fit and reduce original size by 1.5MMS, this collar I imagine should be about 3 _4MMS thick, Alternatively the hole could be welded closed and bored out to the required diameter, Which ever is most practical .. Please see attached rough scetch

Jarl69