Machining Requests

Machining Requests

(51 - 60 from 870 applications)

 
Custom parts
6061 Jet ski sponsons, 3 pairs, 6 parts total

Posted 28d 11h ago

End: 0d 0h

2 Offers

pair of 6061 jet ski sponsons, same part just mirrored, 3 off each side, 6 parts total.

pair of 6061 jet ski sponsons, same part just mirrored, 3 off each side, 6 parts total.

Mtaylor64226 (P)                                                                                    

Custom parts
Pulley Standoffs For CoreXY Motion System

Posted 30d 0h ago

End: 0d 0h

2 Offers

6 off Aluminium

6 off Aluminium

jameslawes                                                                                    

Custom parts
1-of T Bar

Posted 30d 7h ago

End: 0d 0h

2 Offers

Hello there, Looking for prices for this 1-of T Bar. material 4mm thick, Aluminium or alternatively Mild steel (S275JR). All dimensions in mm. Grateful to rec ...

Hello there, Looking for prices for this 1-of T Bar. material 4mm thick, Aluminium or alternatively Mild steel (S275JR). All dimensions in mm. Grateful to receive your quotations. S.Nobile

Seannobile                                                                                    

Custom parts
Prototype jet ski sponsons

Posted 30d 8h ago

End: 0d 0h

2 Offers

6061 aluminium 1 off to start

6061 aluminium 1 off to start

Mtaylor64226 (P)                                                                                    

Custom Machined Parts

0,8 – 1 mm Stainless steel pad

Posted 30day 12h ago

End: 0d 0h

1 Offer

Flex pad for Mountain Bike, Stainless steel 316L was my idea, but open to other steels more adapted for springs (low-alloy manganese, medium-carbon steel or high-carbon steel with a very high yield strength, ref: https://en.wikipedia.org/wiki/Spring_steel). Constant thickness of pad required, but could be 0,8 to 1mm thick. 2 big Holes in the center are not important, could be smaller, or nor drilled at all. Delivery to Germany.

Lapierre06 (P)

Custom parts
LOZENGE DOWEL

Posted 32d 2h ago

End: 0d 0h

5 Offers

PRICE PLEASE FOR A BATCH OF 100/ MATERIAL ALUMINIUM THANKS CRAIG

PRICE PLEASE FOR A BATCH OF 100/ MATERIAL ALUMINIUM THANKS CRAIG

North                                                                                    

Custom parts
Machine car wheel spacers and modify brake discs to new PCD

Posted 33d 1h ago

End: 0d 0h

1 Offer

Please can you quote for: Modifying 2x brake discs (They need 4x holes drilling and tapping to 3/8 24UNF thread on a 85.8mm PCD. Attached is the drawing for th ...

Please can you quote for: Modifying 2x brake discs (They need 4x holes drilling and tapping to 3/8 24UNF thread on a 85.8mm PCD. Attached is the drawing for the standard Marina brake disc showing the holes and their dimensions, I have also attached an image of the brake disc I modified myself when mocking up. I will also provide a 3rd brake disc, this cost me £6 so can be used for a trial run if required, as the 2x discs I want modifying were £50 each!) Machining the following spacers from aluminium, whatever grade you think appropriate for the application. 2x Wheel spacers 2x Disc spacers 1x Caliper spacer NS 1x Caliper spacer OS I have attached .igs, I can instead provide: .stl .igs .model .stp .3dmap .3dxml .cgr .hcg .vps .wrl (Using Catia V5) Please can you also breakdown the quote into setup time, process time, and material costs? I would like this so I can figure out roughly what it would cost to make additional kits.

slughead91                                                                                    

Custom parts
Projector Lamp

Posted 33d 10h ago

End: 0d 0h

0 Offer

Hi, I want to create something like this https://www.thumbsupuk.com/us/Products/Moon_and_Star_Projector The dimension of the dome is approximately 15-20cm an ...

Hi, I want to create something like this https://www.thumbsupuk.com/us/Products/Moon_and_Star_Projector The dimension of the dome is approximately 15-20cm and it is made of ABS plastic, 3mm thick. Initial quantity I will require is 100, but will hopefully increase as time goes by.

MohammadN                                                                                    

Custom parts
Guitar Fretboard

Posted 33d 16h ago

End: 0d 0h

0 Offer

Hi, My name Is Paul and ive recently got into building Guitars. Im looking for someone that can machine wooden Fretboards a specific length width and taper as w ...

Hi, My name Is Paul and ive recently got into building Guitars. Im looking for someone that can machine wooden Fretboards a specific length width and taper as well as fret slots and inlay routing. I will provide the fretboard blanks and install the fretwork and inlays of course ! its a time consuming process by hand absolute precision is essential for the placement of the fret slots to ensure proper intonation. The order will initially be for around 5 fretboards a few different scale lengths and a couple of multi scale "fanned" fretboards. once i'm satisfied with the quality and costs the orders would be regular. I can provide any necessary .dxf or cad files for all of my requirements. Thanks and I look forward to working with you soon.

paulvai1984                                                                                    

Custom Machined Parts

Alum block for drill guide

Posted 34day 1h ago

End: 0d 0h

3 Offers

Hi, I would like to make rectangular alum block with 6x 3mm holes. Please see the attached picture from dimensions. I am OK with any grade of aluminum material. Thanks, -Ismail

izmile A