Machining Requests

Machining Requests

(851 - 860 from 1176 applications)

 
Custom parts
Nozzle chassis

Posted 519d 6h ago

End: 0d 0h

2 Offers

Airsoft nozzle chassis, aluminium 7075, no finishing

Airsoft nozzle chassis, aluminium 7075, no finishing

Batmario                                                                                    

Custom parts
Electrode

Electrode

Posted 520day 10h ago

End: 0d 0h

1 Offer

Custom parts
Wooden cigar holders, 9 separate pieces

Posted 521d 2h ago

End: 0d 0h

0 Offer

As a student I like to smoke an occasional cigar after passing a difficult exam. However the -20 C winters here mean the nicotine will burn your lips into obliv ...

As a student I like to smoke an occasional cigar after passing a difficult exam. However the -20 C winters here mean the nicotine will burn your lips into oblivion. So I bought a cigar holder with a 9 mm coal filter, and I'm happy with it. The mouth piece comes out, it is held in place with friction. I'd like to use that mouth piece and just add cigar holders to fit all cigar sizes. As a student I can't afford the big "aficionado collections", so I'm exploring cigars one at a time. That's why I would like a set of cigar- and cigarillo holders to fit all possible cigars and cigarillos as I explore the this world. Can you help me? I'm looking to make a set of custom cigar holders made from wood. Preferably rosewood, birch, briar or oak. NOT fir. The set will consist of one universal mouthpiece made by another manufacturer. I will mail it to you so you can take the exact measurements. The moutpiece has a 9 mm diameter male friction fitting. Each cigar holder will be trumpet/bowl shaped. Each will fit the mouthpiece, but the 9 mm hole will extend deeper into the cigar holder so that a 9 mm filter fits snugly. The cigar holder itself will be shaped like a trumpet or a wine glass, with a narrow section (filter section). After 10 mm it will start getting wider, to finally be shaped like a wine glass. From the other end, a cigar should fit. To fit the cigar snugly, the inside will be a cone. The wide end of the cone will be 2 mm wider than the narrower end of the cone. At the narrow end of the cone, an arbitrary hemisphere is made. This is of course because the cigar is cut there and shape has little meaning. From the cigar holding cone to the filter, a hole is drilled ~7mm diameter. The sizes I want is: A: Diameter 11 mm to 9 mm Cigar cone length: 12 mm B: Diameter 12 mm to 10 mm Cigar cone length 14 mm C: Diameter: 14 mm to 12 mm Cigar cone length: 16 mm D: Diameter: 16 mm to 14 mm Cigar cone length: 18 mm E: Diameter: 18 mm to 16 mm Cigar cone length: 20 mm F: Diameter: 20 mm to 18 mm Cigar cone length: 22 mm G: Diameter: 22 mm to 20 mm Cigar cone length: 24 mm H: Diameter: 24 mm to 22 mm Cigar cone length: 26 mm I: Diameter: 26 mm to 24 mm Cigar cone length: 28 mm As for the outside shape, I trust your discretion but would like an hourglass-like appearance. Since this depends more on the wood you use and the tools you use, I can make a 3d image of what I would like but in the end I trust your discretion. I wrote that twice to emphasise that this will be your creation. Remember that the walls must be at least 3 mm thick if you use oak or burley, 4-5 mm if you use pear, rose or birch. Can you do this, and can you give me an approximate price range? Email: andree.brink@gmail.com

Student342                                                                                    

Custom Machined Parts
axle holders

axle holders

Posted 521day 5h ago

End: 0d 0h

1 Offer

Need to machine axle holder for the jig. this would sit on alkuminium extrusion Some crude pencil sketch. Details to follow if someone happy to make them. Can prepare cad drawing.

Need to machine axle holder for the jig. this would sit on alkuminium extrusion Some crude pencil sketch. Details to follow if someone happy to make them. Can ...

Need to machine axle holder for the jig. this would sit on alkuminium extrusion Some crude pencil sketch. Details to follow if someone happy to make them. Can prepare cad drawing.

konradtott A

Custom Machined Parts
Turned bar stock. Mild steel

Turned bar stock. Mild steel

Posted 522day 6h ago

End: 0d 0h

1 Offer

28.5mm bar stock turned down and drilled through front with 2mm drill bit until 13mm deep.

28.5mm bar stock turned down and drilled through front with 2mm drill bit until 13mm deep.

28.5mm bar stock turned down and drilled through front with 2mm drill bit until 13mm deep.

Vinny2396 A

Prototype bracket

Posted 522d 10h ago

End: 0d 0h

0 Offer

Aluminium part required, initally a one-off test part with more to follow after final testing. STEP file attached.

(P)                                                                                    

Custom parts
Bespoke Hub-Star

Posted 523d 1h ago

End: 0d 0h

1 Offer

Any material whatsoever, single part, quantity of 1

Any material whatsoever, single part, quantity of 1

Cameronb_01                                                                                    

Water pump impellor

Posted 523d 11h ago

End: 0d 0h

0 Offer

I am interested in creating a working prototype water pump impellor as per the attached preliminary PDF drawing. Material would be phosphor bronze PB1 or equivalent. Would you please advise feasibility and cost.

                                                                                   

Custom Machined Parts
driver boss

driver boss

Posted 523day 13h ago

End: 0d 0h

2 Offers

6061 aluminium, initial quantity 3

6061 aluminium, initial quantity 3

6061 aluminium, initial quantity 3

jimmawer A

Custom parts
Tri glide

Posted 525d 4h ago

End: 0d 0h

0 Offer

Acetal (POM)

Acetal (POM)

sav360@live.com